drpeter's Lamborghini E-Gear Clutch Wear Calculator

Uses MVB-010 from the E-Gear system. Values are based on Lamborghini document L714-014200-EUR14GB-A (page 7).

Usable clutch thickness in mm

Typical wear limit is about 5.6 mm. Adjust if a different spec is confirmed for your clutch.

MVB-010, Line 3 - Real / learned closed position (bits)

Channel: E-Gear > Measured values > MVB-010, Line 3 (current closed clutch position).

MVB-010, Line 4 - Initial closed position (bits)

Factory baseline closed position when clutch was new / first adapted (MVB-010, Line 4).

This is a service-level estimate based on the bit difference between MVB-010 Line 3 and Line 4, converted with 60 bits ≈ 1 mm.

Enter values and click "Calculate wear" to see clutch wear.

This information is believed to be accurate, but you should verify your clutch wear values before making repair decisions or driving the vehicle to avoid possible damage or premature failure.